Unifeeds / mixers agricultural trailers Juscafresa.
Destined to ensure quick, homogeneous and fluffy mixture of various products for prepare a ration of food with the goal of obtain the best results in terms of livestock production and livestock health.
Stands out for its vertical system with chopping and mixing auger with epicyclic reduction and direct lateral unloading ¾ at front right side with collapsible ramp.
Standard equipped with:
2 vertical augers
Spiral thickness of the auger and hopper base of 15 mm
Direct lateral unloading ¾ at front right side with collapsible ramp
Axles according to model:
E100: Square simple axle 100 mm, 1700 track, 8 bolts, brakes 400x80
ECI100: Square rocker axle 100 mm, 1900 track, 10 bolts, brakes 400x80
Capacity: 16 - 30m3
V16DCDD
16m3
V18DCDB
18m3
V20DCDD
20m3
V24DCDD
24m3
V25DCDD
25m3
V30DCDD
30m3
MODELS
V22DCDD
22m3
V16DCDD015001 | V16DCDD005001 | V18DCDD015001 | V18DCDD005001 | V20DCDD015001 | V20DCDD005001 | V22DCDD005001 | V24DCDD005001 | |
|---|---|---|---|---|---|---|---|---|
m3 | 16 | 16 | 18 | 18 | 20 | 20 | 22 | 24 |
A | 7274 | 7274 | 7312 | null | 7360 | null | 7390 | 7470 |
B | 5624 | 5624 | 5700 | null | 5796 | null | 5856 | 6014 |
C | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 |
D | 1700 | 1700 | 1700 | 1700 | 1700 | 1700 | 1700 | 1700 |
E | 2350 | 2004 | 2390 | null | 2430 | null | 2120 | 2200 |
F | 890 | 1020 | 890 | 1020 | 890 | 1020 | 1020 | 1020 |
G | 2520 | 2650 | 2640 | null | 2760 | null | 3020 | 3270 |
H | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 |
I | - | 1300 | - | 1300 | - | 1300 | 1300 | 1300 |
J | 4915 | 3970 | 4915 | 3970 | 4915 | 3970 | 3970 | 3970 |
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.
Mixer system
Chopping and mixing auger with serrated and rounded blades of high resistance, offering an excellent cut with a minimal effort.
Each auger rotates in the same direction creating an optimal circuit for the ideal mixture.
The mixing system is compound by triangular side partition inside the hopper, the augers and the blades attached with the auger. This set creates an unrivalled harmony during mixing of the components by these side partitions that guide the food from the first auger to the second auger while the blades and the augers mixed the food. The design and the structure makes that there is no corner where the food is locked.
Equipped with 8 or 9 blades to the auger.
Lateral unloading ¾ of standard
Direct lateral unloading ¾ at front right side with collapsible ramp.
Optional:
Direct lateral unloading ¾ at back left side with collapsible ramp.
Double direct lateral unloading ¾ at front right side with collapsible ramp and lateral unloading ¾ at back left side with collapsible ramp.
Lateral unloading ¾ with elevation
Direct lateral unloading ¾ at front with hydraulic elevation by chains or conveyor belt length 1080, 1280, 1480 or 1680mm.
Note: accessory not valid for road circulation; exceeds maximum allowed width.
Central back unloading
Back direct central unloading with 6 track faucet.
Slot charge
Slot mineral charge.
Material steel or HB450
Spiral thickness of the auger of 15mm, hopper base of 15 mm on models VT16, VT18, VT20, VT22 and VT24, and 20 mm on models VT25 and VT30 et hopper lateral of 8 mm.
Spiral thickness of the auger of 15mm made with wear material HB450 in option and/or lateral reinforcement hopper made with wear material HB450.
Drive shaft
Drive shafts ratchet torque limiter.
2 speed gearbox manually operated.
1st input velocity driveshaft 540 rpm and output auger 17,94 rpm.
2nd input velocity driveshaft 540 rpm and output auger 33,01 rpm.
Optional 2 speed gearbox hydraulic operated.
1st input velocity driveshaft 540 rpm and output auger 17,94 rpm.
2nd input velocity driveshaft 540 rpm and output auger 33,01 rpm.
Note: incompatible with the independent hydraulic installation.
Direct hydraulic attack to the tractor.
Epicyclic reduction
Epicyclic reduction relation 1/16,36.
Counter-blades
Equipped with 2 manual counter-blades of standard or with 2 hydraulic counter-blades optional.
Containment ring
Containment ring from the hopper level or containment ring above the level of the hopper with extra height +140mm optional.
Hydraulic optional
Hydraulic distributor manual operated of 2 or 7 functions by remote control by cable or electro-valves of 2 or 7 functions with remote control by radio or cable.
Weight system
ICON weighing system with display integrated with the electro-valves
controller and 3 load cells with diameter 73mm for models with single axle and 5 load cells with diameter 73mm for models with tandem axle.
Optional:
Remote control for ICON weighing system.
Display for ICONweighing system.
Software data log LITE-USB Memory.
Battery charger for ICON weighing system.
Weight system
Change to Farmscale 800 system 20 programs x 20 components.
REM54 repeater.
Weight system
Change ICON weighing system and a display to with ICON control via cable and a display to Perin Scale Mod.1510 20 programs x 20 components alphanumeric system.
Farmlink 4 (256K) software with data liker 04 USB interface, full rated USB cable, 2 256K cartridges.
Kit via radio to connect repeaters. Note: Only available for repeaters with Star Bus.
1500R repeater with Star Bus.
REM54 repeater.
Jack-stand
Mechanic jack-stand of standard or hydraulic jack-stand with manual pump optional.
Towing eye Scharmüller
Revolving ring towing eye 903029 of standard not suitable for registration.
Revolving ring towing eye 208858 Scharmüller ISO 5692-1 essential for trailer registration.
Ball towing eye 208863 Scharmüller ISO 24347 essential for trailer registration.
Axle
Square simple axle 100 mm, 1700 track, 8 bolts, brakes 400x80
Square rocker axle 100 mm, 1900 track, 10 bolts, brakes 400x80.
Optional wheels
V16DCDD015001 | V16DCDD005001 | V18DCDD015001 | V18DCDD005001 | V20DCDD015001 | V20DCDD005001 | V22DCDD005001 | V24DCDD005001 | V25DCDD005001 | V30DCDD005001 | |
|---|---|---|---|---|---|---|---|---|---|---|
445/45 R 19,5 | O | O | O | O | O | O | O | O | O | O |
385/65 R 22,5 | O | O | O | O | O | O | O | O | - | - |
445/65 R 22,5 | O | O | O | O | O | O | O | O | O | O |
Registration
Light installation for traffic.
Hydraulic brake simple track with manual load correction valve + mechanic brake.
“A higher quality finish means more machine life”
The Juscafresa finishing process is:
-Polishing of the whole machine removing the impurities that persist in the metal.
-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.
-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.
-Application of a high quality primer layer.
-Application of two layers of Juscafresa paint specially designed with our corporate color.
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.
International export
We ship to all continents and offer fast after-sales service.
more information >
