MPF2

MAXI PLUS

Silage / forage agricultural trailers Juscafresa.

Destined for silage or cereal transport.

Stands out for its unloading by chains with the option of automatic and synchronized unloading to obtain a trailer emptying in a single pass.

The reliable hydraulic suspension increased the stability, a reduce in the same time the tractor drag and reduce the compaction.

Standard equipped with:
4 chains 80/12X manufactured with 20 Mn 4 + S 355 JR
Drawbar with springs of 13 leaves or drawbar with hydraulic elevation and descent, variable in height 

Capacity: 34,00 - 43,80m3

MODELS

F88MPF

F92MPF

F94MPF

F95MPF

34,00m3

36,50m3

38,90m3

43,80m3

 

Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.

 

Drag system

Equipped with a chain drag system.

Drag system

Kit of 4 chains 80/12X manufactured with material 20Mn4+S355JR for models F88MPF and F92MPF of standard.

 

Kit of 4 chains 80/18W manufactured with material 27 Mn Cr B5-2 + Hardox 450 for the models F94MPF and F95MPF of standard or optional on the models F88MPF and F92MPF.

Manual independents tensors.

Reducer

Hydraulic advance chains with reducer 1/24,3, for the models F88MPF and F92MPF of standard.

Hydraulic advance chains with double reducer 1/12,1, for the models F94MPF and F95MPF of standard or optional for the models F88MPF and F92MPF.

Cover

Hydraulic back door opening fully synchronized with the drag system.

Hydraulic kit

Direct hydraulic attack to the tractor with electro-distributor to operate the functions of opening/closing the hydraulic back cover, drag system, raise/descent the hydraulic drawbar and predisposed to connect it at the load sensing of tractor. 

Controller to manage the electro-valves with graphical indicators for manual or automatic operation of the unloading system with graphical and acoustic indicators of opening/closing of the hydraulic back cover.

Drawbar and jack-stand

Drawbar with hydraulic elevation used by a remote control from the tractor and descent, variable in height to provide greater stability to the trailer with double mechanical jack-stand.

Towing eye Scharmüller

Revolving ring towing eye 208284 Scharmüller ISO 20019

Fixed ring towing eye 208092 Scharmüller ISO 20019 

Ball towing eye 207909 Scharmüller ISO 24347

Axle

Available in models F88MPF, F92MPF, F94MPF and F95MPF.

Standard:

Self-steering bogie suspension axle in second square axle 100 or 150mm, 2000 track, 10 bolts, brakes 400x120.

Optional:

Forced steering bogie square axle in second square axle 100 or 150mm commanded with cylinder attached to the tractor, 2000 track, 10 bolts, brakes 400x120. According to norm ISO 26402.

Forced steering bogie square axle in second square axle 100 or 150mm commanded electronically, 2000 track, 10 bolts, brakes 400x120.

Available in models F88MPF, F92MPF and F94MPF.

Standard:

Double sidra self-steering axle in second axle, 2000 track, 10 bolts, brakes 400x120.

Optional:

Double sidra forced steering axle in second axle commanded with cylinder attached to the tractor, 2000 track, 10 bolts, brakes 400x120. According to norm ISO 26402.

 

Double sidra forced steering axle in second axle commanded electronically, 2000 track, 10 bolts, brakes 400x120.

 

Double sidra forced steering axle in first and second axle commanded electronically, 2000 track, 10 bolts, brakes 400x120. Note: Include change from front axle to directional axle.

Available in models F95MPF.

Standard:

Triple sidra self-steering axle in first and third axle, 2000 track, 10 bolts, brakes 400x120.

Optional:

Triple sidra forced steering axle in first and third axle commanded with cylinder attached to the tractor, 2000 track, 10 bolts, brakes 400x120. According to norm ISO 26402.

Triple sidra forced steering axle in first and third axle commanded electronically, 2000 track, 10 bolts, brakes 400x120.

Triple sidra forced steering axle in first, second and third axle commanded electronically, 2000 track, 10 bolts, brakes 400x120. Note: Include change from central axle to directional axle.

Optional wheels

“A higher quality finish means more machine life”

The Juscafresa finishing process is:

-Polishing of the whole machine removing the impurities that persist in the metal.

 

-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.

 

-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.

 

-Application of a high quality primer layer.

 

-Application of two layers of Juscafresa paint specially designed with our corporate color.

Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.

 
1/15
 

Questions?
Talk to a chat specialist or send an email to info@juscafresa.com.

​more information >

International export
We ship to all continents and offer fast after-sales service.

​more information >

Financing options
Check our financing plans through the financial De Lage Landen

​more information >

Logo Juscafresa white.png
  • Instagram Juscafresa
  • Facebook Juscafresa
  • Twitter Juscafresa
  • YouTube Juscafresa

Contact

Avda. Saus 16, 17465 Camallera (Girona)

Catalonia - Spain- Europe

42°07'36.7"N 2°58'07.9"E

42.126861, 2.968863

phone +34 972 794 000

whatsapp +34 627 440 286

mail info@juscafresa.com

Schedule from Monday to Friday
mornings from 08:00 a.m. to 03:00 p.m.

WhatsApp
seko logo.png

Official importer in Spain of:

Partner of:

ansemat logo.png
femac logo.png