Manure spreaders / muck spreaders agricultural trailers Juscafresa.
Destined for large agriculture works / farms.
Stands out for its excellent spread quality, its strongness and extra high load capacity greater to the other series.
Standard equipped with:
Drag system 4 chains 80/12X 20 Mn 4 + S 355 JR or 80/18W 27 Mn Cr B5-2 + HARDOX 450
Veritcal beaters of 2 columns chopping type group SP 1000/405 rpm with screwing flat spikes and height 2200 mm
Hydraulic back cover with vertical opening type guillotine with cylinders compensation system
Drawbar with hydraulic elevation and descent, variable in height and double mechanic jack-stand
Capacity: 20,20 - 25,20m3
MODELS
E92KMP2
20,20m3
E94KMP2
21,85m3
E95KMP2
25,20m3
E92MSP2131003 | E94MSP2131003 | E94MSP2118003 | E95MSP2131003 | E95MSP2118003 | |
---|---|---|---|---|---|
m3 | 20,2 | 21,85 | 21,85 | 25,2 | 25,2 |
A | 9088 | 9588 | 9588 | 10588 | 10588 |
B | 7419 | 7919 | 7919 | 8918 | 8918 |
C | 2582 | 2582 | 2582 | 2582 | 2582 |
D | 2000 | 2000 | 2000 | 2000 | 2000 |
E | 2287 | 2451 | 1651 | 2807 | 2006 |
F | 1422 | 1422 | 1422 | 1422 | 1422 |
G | 3368 | 3368 | 3368 | 3368 | 3368 |
H | 550 | 550 | 550 | 550 | 550 |
I | 1600 | 1600 | 1600 | 1600 | 1600 |
J | 3707 | 3707 | 3707 | 3707 | 3707 |
K | 5201 | 5537 | 4737 | 6181 | 5382 |
U | 5955 | 6455 | 6455 | 7455 | 7455 |
X | 2270 | 2270 | 2270 | 2270 | 2270 |
wheel | 1250 | 1250 | 1250 | 1250 | 1250 |
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.
Spreader system
Veritcal beaters of 2 columns chopping type with screwing flat spikes.
Serial speed 1000/405rpm.
The lower plates are protected by plates in order to avoid the material fall directly to the floor and ensuring it is spread through the back without falling below the machine and getting it dirty.
Symetrical star shape of Beaters and serial screwing flat spikes.
Serial speed 1000/405rpm.
Spikes
Screwing flat spikes for serial beaters or screwing hand duck spikes for optional beaters.
The screwing hand duck are essential for spreading dry and fine manure without weight like manure hens.
Material steel or stainless
4mm side thickness and 4mm floor thickness.
Floor, laterals, hydrauilc back cover and frontal stainless optional.
Drive shaft Bondioli & Pavesi
Homokinetic joint front transmission and overrunning clutch and back transmission with friction disk clutch.
Drag system
Kit of 6 chains 80/12X manufactured with material 20Mn4+S355JR for models E92MSP2 of standard.
Kit of 6 chains 80/18W manufactured with material 27 Mn Cr B5-2 + Hardox 450 for the models E94MSP2 and E95MSP2 of standard or optional on the models E92MSP2.
Hydraulic automatic tensors of standard.
Reducer
Hydraulic advance chains with double reducer 1/12,1.
Velocity commandment from the chains
Manual velocity commandment from the chains floor of standard or
electronic optional.
Cover
Hydraulic back cover with vertical opening type guillotine with cylinders compensation system.
The vertical opening type guillotine can add an indicator door opening for hydraulic back cover.
Beaters protection
Hydraulic back cover for beaters protection.
Channelers sheets
Channelers sheets of manure to direct it where we want.
Lateral height extension panels optional
Laterals height extension panels for forage and cereal 0,4m
Laterals height extension panels for forage 0,5m 1 piece with hydraulic cover. Note: height extension panels equiped with mobil grille for hidraulic cylinder and incorporate water tap of 3 tracks
Laterals height extension panels for forage 0,7m 1 piece with hydraulic cover. Note: height extension panels equiped with mobil grille for hidraulic cylinder and incorporate water tap of 3 tracks
Awning optional
Awning hooks
Upper awning manual power up with rails to protect the load. Note: only apt with hydraulic back cover with vertical opening type guillotine
Upper awning pneumatic or electric power up used by radio controler by cable with rails to protect the load. Note: only apt with hydraulic back cover with vertical opening type guillotine
Drawbar and jack-stand
Drawbar with hydraulic elevation and descent, variable in height and double mechanic jack-stand.
Towing eye Scharmüller
Revolving ring towing eye 208284 Scharmüller ISO 20019
Fixed ring towing eye 208092 Scharmüller ISO 20019
Ball towing eye 207909 Scharmüller ISO 24347
Axle
Available in models E92MSP2, E94MSP2 and E95MSP2.
Standard:
Double sidra self-steering axle in second axle, 2000 track, 10 bolts, brakes 400x120.
Optional:
Double sidra forced steering axle in second axle commanded with cylinder attached to the tractor, 2000 track, 10 bolts, brakes 400x120. According to norm ISO 26402.
Double sidra forced steering axle in second axle commanded electronically, 2000 track, 10 bolts, brakes 400x120.
Double sidra forced steering axle in first and second axle commanded electronically, 2000 track, 10 bolts, brakes 400x120. Note: Include change from front axle to directional axle.
Available in models E94MSP2 and E95MSP2.
Standard:
Triple sidra self-steering axle in first and third axle, 2000 track, 10 bolts, brakes 400x120.
Optional:
Triple sidra forced steering axle in first and third axle commanded with cylinder attached to the tractor, 2000 track, 10 bolts, brakes 400x120. According to norm ISO 26402.
Triple sidra forced steering axle in first and third axle commanded electronically, 2000 track, 10 bolts, brakes 400x120.
Triple sidra forced steering axle in first, second and third axle commanded electronically, 2000 track, 10 bolts, brakes 400x120. Note: Include change from central axle to directional axle.
Optional wheels
E92MSP2131003 | E94MSP2131003 | E94MSP2118003 | E95MSP2131003 | E95MSP2118003 | |
---|---|---|---|---|---|
560/60 R 22,5 | O | O | O | O | O |
580/65 R 22,5 | O | O | O | O | O |
650/50 R 22,5 | O | O | O | O | O |
710/45 R 22,5 | O | O | O | O | O |
More options
DRAG SYSTEM
Double set of drag rungs by set of 6 chains for mud.
Double lower bottom chains.
Valve to increase the speed of chains advance.
GPS system.
Flow regulator reduction.
BOX AND SPREADER GROUP
Bracket preparation to mount height extension panels.
2 back headlights to improve the visibility.
Kit 1 camera for viewing inside.
Kit 2 Front and back cameras for viewing inside and machine back.
Tool box.
Water tank.
Pneumatic break with block acts
Pneumatic break + hydraulic with block acts.
“A higher quality finish means more machine life”
The Juscafresa finishing process is:
-Polishing of the whole machine removing the impurities that persist in the metal.
-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.
-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.
-Application of a high quality primer layer.
-Application of two layers of Juscafresa paint specially designed with our corporate color.
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.