Manure spreaders / muck spreaders agricultural trailers Juscafresa.
Destined for large agriculture works / farms.
Stands out for its excellent spread quality, the high compact load capacity, stability on the grounds with different heights and reduction of the tractive force by decreasing the friction force against the ground. Light version of the CBW2 series.
Standard equipped with:
Drag system 2 chains 80/12 C 10 + S 275 JR, 4 chains 80/12 C 10 + S 275 JR or 80/12X 20 Mn 4 + S 355 JR
Veritcal beaters of 2 columns chopping type group B 540/330 rpm and height 2030 mm ou group P 540/390 rpm and height 2200 mm with screwing flat spikes
Hydraulic back cover with vertical opening type guillotine with cylinder compensation system
Silentblock drawbar or drawbar with parabolic transversal springs of 2 leaves
Capacity: 9,12 - 14,30m3
MODELS
E11CBW2
9,12m3
E12CBW2
10,24m3
E14CBW2
E15CBW2
13,00m3
14,30m3
E11LBW2043003 | E12LBW2043003 | E14LBW2028003 | E15LBW2028003 | |
|---|---|---|---|---|
m3 | 9,12 | 10,24 | 13 | 14,3 |
A | 6568 | 7068 | 7568 | 8068 |
B | 5540 | 6040 | 6540 | 7040 |
C | 2800 | 2800 | 2850 | 2850 |
D | 2100 | 2100 | 2230 | 2230 |
E | 2209 | 2259 | 2409 | 2609 |
F | 1125 | 1125 | 1240 | 1240 |
G | 2796 | 2796 | 2921 | 2921 |
H | 450 | 450 | 550 | 550 |
J | 3151 | 3151 | 3476 | 3476 |
K | 4359 | 4859 | 5159 | 5459 |
U | 4148 | 4648 | 5148 | 5648 |
X | 1530 | 1530 | 1530 | 1530 |
wheel | 1585 | 1585 | 1835 | 1835 |
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.
Spreader system
Veritcal beaters of 2 columns chopping type with screwing flat spikes.
Serial speed 540/330rpm o 540/390rpm or optional 540/390rpm, 1000/566rpm or 1000/405rpm.
The lower plates are protected by plates in order to avoid the material fall directly to the floor and ensuring it is spread through the back without falling below the machine and getting it dirty.
Symetrical star shape of Beaters and serial screwing flat spikes.
Serial speed 540/330rpm o 540/390rpm or 540/390rpm, optional 1000/566rpm or 1000/405rpm.
Spikes
Screwing flat spikes for serial beaters or screwing hand duck spikes for optional beaters.
The screwing hand duck are essential for spreading dry and fine manure without weight like manure hens.
Material steel or stainless
4mm side thickness and 4mm floor thickness.
Floor, laterals, hydrauilc back cover and frontal stainless optional.
Drive shaft Bondioli & Pavesi
Standard front transmission with security screw or homokinetic joint with security screw and overrunning clutch back transmission for models E11CBW2 and E12CBW2.
Homokinetic joint front transmission and overrunning clutch back transmission with friction disk clutch for models E14CBW2 and E15CBW2 of standard or optional on the models E11CBW2 and E12CBW2.
Drag system
Kit of 4 chains 80/12 manufactured with material C10+S275JR for models E11LBW2 and E12LBW2 of standard.
Kit of 4 chains 80/12X manufactured with material 20Mn4+S355JR for the models E14LBW2 and E15LBW2 of standard.
Manual independents tensors of standard or optional hydraulic automatic tensors.
Reducer
Hydraulic advance chains with reducer 1/24,3.
Velocity commandment from the chains
Manual velocity commandment from the chains floor of standard or
electronic optional.
Cover
Hydraulic back cover with vertical opening type guillotine with cylinders compensation system.
The vertical opening type guillotine can add an indicator door opening for hydraulic back cover.
Side deflectors
Side deflectors of manure to direct it where we want.
Drawbar and jack-stand
Silentblock drawbar with mechanic jack-stand for models E11CBW2 and E12CBW; and drawbar with springs of parabolic 2 leave with hydraulic jack-stand with manual pump for models E14CBW2 and E15CBW2 of standard or jack-stand with manual pump optional on the models E11CBW2 and E12CBW2.
Towing eye Scharmüller
Revolving ring towing eye 208734 Scharmüller ISO 20019/ ISO 5692-1
Fixed ring towing eye 208736 Scharmüller ISO 5692-1
Ball towing eye 208735 Scharmüller ISO 24347
Axle
Square straight axle 100mm, 2100 track, 10 bolts, brakes 400x80 on models E11CBW2 and E12CBW2.
Square straight axle 110mm, 2230 track, 10 bolts, brakes 400x120 on models E14CBW2 and E15CBW2.
Optional wheels
E11LBW2042003 | E12LBW2043003 | E14LBW2028003 | E15LBW2028003 | |
|---|---|---|---|---|
23.1-26 16PR | O | O | - | - |
18.4/15 R 34 | O | O | - | - |
18.4/15 R 38 | O | O | - | - |
620/75 R 26 | O | O | - | - |
580/70 R 38 | - | - | O | O |
650/77 R 32 | - | - | O | O |
710/70 R 38 | - | - | O | O |
“A higher quality finish means more machine life”
The Juscafresa finishing process is:
-Polishing of the whole machine removing the impurities that persist in the metal.
-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.
-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.
-Application of a high quality primer layer.
-Application of two layers of Juscafresa paint specially designed with our corporate color.
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.
International export
We ship to all continents and offer fast after-sales service.
more information >
