top of page

Manure spreaders / muck spreaders agricultural trailers Juscafresa.
Destined for large agriculture works / farms.

Stands out for its excellent spread quality, its strongness and extra high load capacity. 

Standard equipped with:
Drag system 4 chains 80/12 C 10 + S 275 JR, 80/12X 20 Mn 4 + S 355 JR or 80/18W 27 Mn Cr B5-2 + HARDOX 450
Veritcal beaters of 2 columns chopping type group P 540/390 rpm with screwing flat spikes and height 2200 mm
Hydraulic back cover compass type
Drawbar with springs of 13 leaves

Capacity: 16,82 - 22,98m3

MODELS

E88KMP2

16,82m3

E92KMP2

18,36m3

E94KMP2

E95KMP2

19,90m3

22,98m3

Dimensiones KMP2
kmp2
kmp2 tr
Dimensions
E88KMP2005003
E88KMP2053003
E92KMP2005003
E92KMP2053003
E94KMP2062003
E95KMP2062003
E95KMP2118003
m3
16.82
16.82
18.36
18.36
19.9
22.98
22.98
A
8350
8350
8850
8850
9350
10350
10350
B
6811
6811
7311
7311
7811
8811
8811
C
2526
2526
2526
2526
2526
2526
2526
D
1900
2000
1900
2000
2000
2000
2000
E
1961
1877
2331
2245
2346
2698
1893
F
1550
1590
1550
1590
1590
1590
1630
G
3003
3162
3143
3162
3219
3219
3246
H
450
450
450
450
500
500
500
I
1300
1470
1300
1470
1590
1590
1600
J
3462
3589
3604
3589
3679
3679
3706
K
5089
5003
5219
5135
5414
6062
5257
U
5430
5430
5930
5930
6430
7430
7430
X
2130
2130
2130
2130
2130
2130
2130
wheel
1070
1160
1160
1160
1250
1250
1240

Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.

Características-KMP2

Spreader system

Veritcal beaters of 2 columns chopping type with screwing flat spikes. 

Serial speed 540/390rpm or optional 1000/566rpm or 1000/405rpm.

 

The lower plates are protected by plates in order to avoid the material fall directly to the floor and ensuring it is spread through the back without falling below the machine and getting it dirty.

Symetrical star shape of Beaters and serial screwing flat spikes.

Serial speed 540/390rpm or optional 1000/566rpm or 1000/405rpm.

kmp2
puas standar
puas pato

Spikes

Screwing flat spikes for serial beaters or screwing hand duck spikes for optional beaters. ​

The screwing hand duck are essential for spreading dry and fine manure without weight like manure hens.

Material steel or stainless

5mm side thickness and 4mm floor thickness.

 

Floor, laterals, hydrauilc back cover and frontal stainless optional.

Drive shaft Bondioli & Pavesi

Homokinetic joint front transmission and overrunning clutch and back transmission with friction disk clutch.

7G7R121CEWR7A52-1.png
7G7R121CEWR7A52-2.png
7G5R061CEWR7Q11-2.png
cadena-80_12-80_12X.png
cadena-80_15X.png

Drag system

Kit of 4 chains 80/12X manufactured with material 20Mn4+S355JR for models E88KMP2 and E92KMP2 of standard.

 

Kit of 4 chains 80/18W manufactured with material 27 Mn Cr B5-2 + Hardox 450 for the models E94KMP2 and E95KMP2 of standard or optional on the models E88KMP2 and E92KMP2.

Manual independents tensors of standard or optional hydraulic automatic tensors.

Reducer

Hydraulic advance chains with reducer 1/24,3, for the models E88KMP2 and E92KMP2 of standard.

Hydraulic advance chains with double reducer 1/12,1, for the models E94KMP2 and E95KMP2 of standard or optional for the models E88KMP2 and E92KMP2.

reductor 24,3
reductor 12,5
distribuidor electronico
distribuidor manual

Velocity commandment from the chains

Manual velocity commandment from the chains floor of standard or 

electronic optional.

Cover

Hydraulic back cover compass type of standars or hydraulic back cover with vertical opening type guillotine with cylinders compensation system optional.

The vertical opening type guillotine can add an indicator door opening for hydraulic back cover.

puertas
tapa molinetes

Beaters protection

Hydraulic back cover for beaters protection.

Channelers sheets

Channelers sheets of manure to direct it where we want.

canalizadoras
alzas

Lateral height extension panels optional

Laterals height extension panels for forage and cereal 0,4m

Laterals height extension panels for forage 0,5m 1 piece with hydraulic cover. Note: height extension panels equiped with mobil grille for hidraulic cylinder and incorporate water tap of 3 tracks

Laterals height extension panels for forage 0,7m 1 piece with hydraulic cover. Note: height extension panels equiped with mobil grille for hidraulic cylinder and incorporate water tap of 3 tracks 

Awning optional

Awning hooks

Upper awning manual power up with rails to protect the load. Note: only apt with hydraulic back cover with vertical opening type guillotine 

Upper awning pneumatic or electric power up used by radio controler by cable with rails to protect the load. Note: only apt with hydraulic back cover with vertical opening type guillotine 

toldo

Drawbar and jack-stand

Drawbar with springs of 13 leaves with hydraulic jack-stand with manual pump.

lanza

Towing eye Scharmüller

208284
208092
207909

Revolving ring towing eye 208284 Scharmüller ISO 20019

Fixed ring towing eye 208092 Scharmüller ISO 20019 

Ball towing eye 207909 Scharmüller ISO 24347

Axle

E100

Available in models E88KMP2 and E92KMP2.

Standard:

Square rocker axle 100 mm, 1900 track, 10 bolts, brakes 400x80.

Sidra131

Available in models E92KMP2, E94KMP2 and E95KMP2.

Standard:

Double sidra self-steering axle in second axle, 2000 track, 10 bolts, brakes 400x120.

Optional:

Double sidra forced steering axle in second axle commanded with cylinder attached to the tractor, 2000 track, 10 bolts, brakes 400x120. According to norm ISO 26402.

 

Double sidra forced steering axle in second axle commanded electronically, 2000 track, 10 bolts, brakes 400x120.

 

Double sidra forced steering axle in first and second axle commanded electronically, 2000 track, 10 bolts, brakes 400x120. Note: Include change from front axle to directional axle.

EB100-150

Available 100mm in models E88KMP2 and E92KMP2.

Available 150mm in models E94KMP2 and E95KMP2.

Standard:

Self-steering bogie suspension axle in second square axle 100 or 150mm, 2000 track, 10 bolts, brakes 400x120.

Optional:

Forced steering bogie square axle in second square axle 100 or 150mm commanded with cylinder attached to the tractor, 2000 track, 10 bolts, brakes 400x120. According to norm ISO 26402.

Forced steering bogie square axle in second square axle 100 or 150mm commanded electronically, 2000 track, 10 bolts, brakes 400x120.

Sidra

Available in models E95KMP2.

Standard:

Triple sidra self-steering axle in first and third axle, 2000 track, 10 bolts, brakes 400x120.

Optional:

Triple sidra forced steering axle in first and third axle commanded with cylinder attached to the tractor, 2000 track, 10 bolts, brakes 400x120. According to norm ISO 26402.

Triple sidra forced steering axle in first and third axle commanded electronically, 2000 track, 10 bolts, brakes 400x120.

Triple sidra forced steering axle in first, second and third axle commanded electronically, 2000 track, 10 bolts, brakes 400x120. Note: Include change from central axle to directional axle.

Optional wheels

E88KMP2005003
E88KMP2053003
E92KMP2005003
E92KMP2053003
E94KMP2062003
E95KMP2062003
E95KMP2118003

More options

DRAG SYSTEM

Double set of drag rungs by set of 4 chains for mud.

Double lower bottom chains.

Valve to increase the speed of chains advance.

GPS system.

Flow regulator reduction.

BOX AND SPREADER GROUP

Change box with height 1470mm to 1270mm. Note: change hydraulic back cover with vertical opening type guillotine with cylinder compensation system included.

Horizontal beaters of 2 columns chopping type and lower plates 1000 rpm.

Bracket preparation to mount height extension panels.

2 back headlights to improve the visibility.

Kit 1 camera for viewing inside.

Kit 2 Front and back cameras for viewing inside and machine back.

Tool box.

Water tank.

Pneumatic break with block acts

Pneumatic break + hydraulic with block acts.

“A higher quality finish means more machine life”

The Juscafresa finishing process is:

-Polishing of the whole machine removing the impurities that persist in the metal.

 

-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.

 

-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.

 

-Application of a high quality primer layer.

 

-Application of two layers of Juscafresa paint specially designed with our corporate color.

acabado metal juscafresa

Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.

Galeria KMP2
Vídeos KMP2
chat

Questions?
Talk to a chat specialist or send an email to info@juscafresa.com.

​more information >

export mundial

International export
We ship to all continents and offer fast after-sales service.

​more information >

de lage landen

Financing options
Check our financing plans through the financial De Lage Landen

​more information >

bottom of page