MIXERS vertical system VTDCEC

Unifeeds / mixers agricultural trailers Juscafresa.

Destined to ensure quick, homogeneous and fluffy mixture of various products for prepare a ration of food with the goal of obtain the best results in terms of livestock production and livestock health.

Stands out for its vertical system with chopping and mixing auger with epicyclic reduction, direct lateral unloading ¾ at front right side with collapsible ramp, strawbedding turbine of 2 speeds and direct lateral lower exit from strawbedding unloading height steerableat at right side.

Standard equipped with:
2 vertical augers
Spiral thickness of the auger and hopper base of 15 mm
Direct lateral unloading ¾ at front right side with collapsible ramp
Strawbedding turbine of 2 speeds
Direct lateral lower exit from strawbedding unloading height steerableat at right side
Axles according to model:
E100: Square simple axle 100 mm, 1700 track, 8 bolts, brakes 400x80
ECI100: Square rocker axle 100 mm, 1900 track, 10 bolts, brakes 400x80

STANDARD EQUIPMENT
 
BASIC FEATURES
Capacity m3 18
Power HP 100
 
DRIVE SHAFTS
Drive shafts ratchet torque limiter
2 speed gearbox hydraulic operated 1st input velocity driveshaft 540 rpm and output auger 17,94 rpm. 2nd input velocity driveshaft 540 rpm and output auger 33,01 rpm. Note: incompatible with the independent hydraulic installation
Epicyclic reduction relation 1/16,36
 
HYDRAULIC KIT
Direct hydraulic attack to the tractor. Note: hydraulic power point with simple free flow returning
Used by electro-valves with remote control used by radio or cable from 5 functions where 4 are occupied and 1 is available
 
HOPPER
Equipped with 2 vertical augers
Equipped with 8 blades to the auger
Equipped with 2 manual counter-blades
Spiral thickness of the auger of 15 mm
Hopper base of 15 mm
Lateral hopper thickness of 8 mm
 
UNLOADING SYSTEM
Direct lateral unloading ¾ at front right side with collapsible ramp
Electro-valves of 4 functions with remote control by cable and remote diplay
Strawbedding turbine of 2 speeds
Direct lateral lower exit from strawbedding unloading height steerableat at right side
 
WEIGHT SYSTEM
5 load cells with 73 mm of diameter
Weighing system 700, 20 recipes x 20 components
 
CHASSIS AND BODYWORK
Access ladder to check inside hopper
Compact structure
Hydraulic jack-stand with manual pump
Hydraulic + mechanical break
Revolving ring towing eye 903029
 
AXLE
E100: Square simple axle 100 mm, 1700 track, 8 bolts, brakes 400x80
 
TYRES
Wheels (4) 445/45R19.5 (160J) RETREADED Diameter: - Section: - Load at 25km/h: 6075kg/wheel aprox. Load at 40km/h: 5175kg/wheel aprox.
 
 
OPTIONAL EQUIPMENT
 
DRIVE SHAFTS
Homokinetic joint front transmission
 
HYDRAULIC KIT
2 speed gearbox operated by cable from the tractor for the strawbedding turbine
Remote control by radio or cable of 7 functions. Note: adds 1 function
 
HOPPER
Equipped with 2 hydraulic counter-blades
Spiral thickness of the auger of 15mm made with wear material HB450
Lateral reinforcement hopper made with wear material HB450 hight 1.250mm
Containment ring from the hopper level
Containment ring above the level of the hopper with extra height +140mm
Slot mineral charge
 
UNLOADING SYSTEM
Double direct lateral unloading ¾ at front right side with collapsible ramp and lateral unloading ¾ at back left side with collapsible ramp
Direct lateral upperexit from strawbedding unloading height steerableat at left side and revolving
Back direct central unloading with 6 track faucet
Magnet double 445x105x50mm
 
WEIGHT SYSTEM
Weighing system 1520, 99 recipes x 20 components and 10 discharges. Ready to connect: supplementary: numeric or alphanumeric display, data transfer to/from PC, radio transmission unit and module control to relays input/output ON/OFF
Kit Cartridge Farmlink4 Light (Software, interface, data linker usb, cable interface, 2 cartridge 256K)
Thermic printer for weighing system 1520
Display numeric LED REM/40 with height figures 40mm for weighing system 1520 and kit by radio Mesures: L 175 X A 130 X P 105mm
Display numeric LED REM/57 with height figures 57 mm for weighing system 700 and 1520 and kit by radio Mesures: L 315 X A 130 X P 105mm
Transmission unit by radio
Battery
 
CHASSIS AND BODYWORK
Light installation for traffic. Note: essential for trailer registration
Rotary beacon for the danger signalling
Revolving ring towing eye 208858 Scharmüller ISO 5692-1. Note: required to matriculate
Ball towing eye 208863 Scharmüller ISO 24347. Note: required to matriculate
 
TYRES
Wheels (4) 445/45R19.5 (160J) BLT03 BARCKLEY Diameter: 895mm Section: 446mm Load at 25km/h: 6075kg/wheel Load at 40km/h: 5175kg/wheel
Wheels (6) 445/45R19.5 (160J) T820 LINGLONG Diameter: 895mm Section: 446mm Load at 25km/h: 6075kg/wheel Load at 40km/h: 5175kg/wheel
(A) Total length
8510
(C) Total width
2550
(E) Back cantilever
2390
(H) Hitch height
500
(J) Distance between notch and axle
6120
(B) Outside length box
5700
(D) Via the axes
1700
(F) Hight flat
890
(G) Hauteur totale
2640

Catalog

Catalog PRODUCTS JUSCAFRESA - v.001.002.2018
Catalog UNIFEEDS / MIXERS - VTSNDD, VTSCDD, VTDCDD, VTSCDB, VTDCDB, VTDCEC - v.002.010.2017
CONFIGURATOR LEGEND
Standard equipment
Equipment unselected
Optional equipment selected
Not compatible equipment
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.