ZERO GRAZERS SAJDLDH

Zero grazer agricultural trailers Juscafresa.

Destined for mowing and forage transport.

Stands out for its system that starts with the movement of the plates that creates air turbulance that helps to move the feed into the bottom of the elevator. During the mower operation, the elevator put the forage on the front part of the trailer, and then the floor chains moves the material from the front to the back part of the trailer.

Standard equipped with:
Hydraulic installation system to use the elevator and the dispenser motors
Bilateral unloading by chains 2160x900 mm and with hydraulic displacement to the back part by hydraulic motor
Dispenser provides continuous distribution for the unloading by hydraulic motor
Automatic synchronizing for the unloading and security synchronization to avoid compressions on the dispenser
Cutting width 1900 mm
Hydraulically displaceable drawbar
EBI70: Rocker axle 70 mm, track 1520, 6 bolts, brakes 300x60

STANDARD EQUIPMENT
 
BASIC FEATURES
Box length mm 4040
Box width mm 1800
Side height mm 1340
Arches height mm 560
Capacity m3 11
Capacity m3 with arches 14
Power HP 75
 
DRIVE SHAFTS
Homokinetic joint front transmission and friction disk clutch
Back standard transmission and homokinetic joint
 
HYDRAULIC KIT
Automatic synchronizing for the unloading and security synchronization to avoid compressions on the dispenser
Direct hydraulic attack to the tractor. Note: hydraulic power point with simple or double free flow returning
Hydraulic installation system to use the elevator and the dispenser motors
Electro-valves with control button box by cable to operate all the functions
 
UNLOADING SYSTEM
Hydraulic unloading by floor chains by a hydraulic reducer
Manual velocity commandment from the chains floor
Bilateral unloading by chains 2160x900 mm and with hydraulic displacement to the back part by hydraulic motor
Dispenser provides continuous distribution for the unloading by hydraulic motor
Folding arches
 
ELEVATOR AND MOWER
Hydraulic use for the elevator
Elevator equipped with 9 blades
Automatic and mechanic disconnection of the mower
Cutting width 1900 mm
 
CHASSIS AND BODYWORK
Circulation lights installation
Hydraulically displaceable drawbar
Mechanic jack-stand
Hydraulic + mechanical break
Revolving ring towing eye 208857 Scharmüller ISO 5692-2
 
AXLE
EBI70: Rocker axle 70 mm, track 1520, 6 bolts, brakes 300x60
 
 
OPTIONAL EQUIPMENT
 
UNLOADING SYSTEM
Bilateral unloading by conveyor belt 2160x900 mm with hydraulic displacement to the back part and hydraulic motor for its working
Bilateral hydraulic unloading at right by chains 2160x600 mm (instead of 2160x900 mm) + unloading with hydraulic elevation by chains 860x610 mm
Bilateral hydraulic unloading at right by conveyor belt 2160x600 mm (instead of 2160x900 mm) + unloading with hydraulic elevation by conveyor belt 860x610 mm
 
CHASSIS AND BODYWORK
Rotary beacon for the danger signalling
Hydraulic jack-stand with manual pump
Ball towing eye 208864 Scharmüller ISO 24347
 
TYRES
Wheels (4) 19.0/45-17 (146 A8) 327 ALLIANCE Diameter: 865mm Section: 480mm Load at 25km/h: 4280kg/wheel Load at 40km/h: 3600kg/wheel
Wheels (4) 480/45-17 (146A8) AW305 TRELLEBORG Diameter: 860mm Section: 478mm Load at 25km/h: 4280kg/wheel Load at 40km/h: 3600kg/wheel
(A) Total length
7840
(C) Total width
2320
(E) Back cantilever
2710
(J) Height side
2570
(I) Wheelbase
900
(L) Inside width of the box
1800
(K) Rotary cutting width
1900
(Q) Dispenser height
2950
(B) Outside length box
4720
(D) Via the axes
1520
(F) Hight flat
1180
(H) Hitch height
450
(G) Hauteur totale
3120
(O) Inside length of the box
4040
(N) Unloading height
720
(P) Length without hitch
7230

Catalog

Catalog PRODUCTS JUSCAFRESA - v.001.002.2018
Catalog ZERO GRAZERS - THH, DLH, DLDH - v.001.010.2017
CONFIGURATOR LEGEND
Standard equipment
Equipment unselected
Optional equipment selected
Not compatible equipment
Model:  S14DLDH154001-14m3
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.