ZERO GRAZERS SAJDLDH

Zero grazer agricultural trailers Juscafresa.

Destined for mowing and forage transport.

Stands out for its system that starts with the movement of the plates that creates air turbulance that helps to move the feed into the bottom of the elevator. During the mower operation, the elevator put the forage on the front part of the trailer, and then the floor chains moves the material from the front to the back part of the trailer.

Standard equipped with:
Hydraulic installation system to use the elevator and the dispenser motors with refrigeration system
Bilateral unloading by rubber conveyor chains 2360x900 mm with hydraulic displacement to the back part and hydraulic motor for its working
Dispenser provides continuous distribution for the unloading by two hydraulic motors, with electrohydraulic pressure switch that controls the advance of the floor chains
Cutting width 2100 mm
Hydraulically displaceable drawbar
ECI100: Square rocker axle 100 mm, 1900 track, 10 bolts, brakes 400x80

STANDARD EQUIPMENT
 
BASIC FEATURES
Box length mm 4750
Box width mm 2000
Side height mm 1800
Arches height mm 730
Capacity m3 17
Capacity m3 with arches 23
Power HP 140
 
DRIVE SHAFTS
Homokinetic joint front transmission and friction disk clutch
Back standard transmission and homokinetic joint
 
HYDRAULIC KIT
Automatic synchronizing for the unloading and security synchronization to avoid compressions on the dispenser
Direct hydraulic attack to the tractor. Note: hydraulic power point with simple or double free flow returning
Hydraulic installation system to use the elevator and the dispenser motors with refrigeration system
Electro-valves with control button box by cable to operate all the functions
 
UNLOADING SYSTEM
Hydraulic unloading by floor chains by a hydraulic reducer
Electronic velocity commandment from the chains floor
Bilateral unloading by rubber conveyor chains 2360x900 mm with hydraulic displacement to the back part and hydraulic motor for its working
Dispenser provides continuous distribution for the unloading by two hydraulic motors, with electrohydraulic pressure switch that controls the advance of the floor chains
Folding arches
 
ELEVATOR AND MOWER
Elevator operate hydraulically by double reducer
Elevator equipped with 9 blades
Hydraulic disconnection of the mower
Cutting width 2100mm
 
CHASSIS AND BODYWORK
Circulation lights installation
Hydraulically displaceable drawbar
Hydraulic angular jack-stand
Hydraulic + mechanical break
Revolving ring towing eye 208284 Scharmüller ISO 20019
 
AXLE
ECI100: Square rocker axle 100 mm, 1900 track, 10 bolts, brakes 400x80
 
 
OPTIONAL EQUIPMENT
 
HYDRAULIC KIT
Weighing system integer by load cells
 
CHASSIS AND BODYWORK
Rotary beacon for the danger signalling
Fixed ring towing eye 208092 Scharmüller ISO 20019
Ball towing eye 207909 Scharmüller ISO 24347
 
TYRES
Wheels (4) 560/45R22.5 (152D) 885 ALLIANCE Diameter: 1060mm Section: 543mm Load at 25km/h: 5610kg/wheel Load at 40km/h: 4830kg/wheel
Wheels (4) 560/45R22.5 (152D) 390 ALLIANCE Diameter: 1078mm Section: 545mm Load at 25km/h: 5610kg/wheel Load at 40km/h: 4830kg/wheel
(A) Total length
9360
(C) Total width
2550
(E) Back cantilever
2780
(J) Height side
3020
(I) Wheelbase
1300
(L) Inside width of the box
2000
(K) Rotary cutting width
2100
(Q) Dispenser height
3220
(B) Outside length box
5490
(D) Via the axes
1900
(F) Hight flat
1360
(H) Hitch height
550
(G) Hauteur totale
3550
(O) Inside length of the box
4780
(N) Unloading height
860

Catalog

Catalog PRODUCTS JUSCAFRESA - v.001.002.2018
Catalog ZERO GRAZERS - THH, DLH, DLDH - v.001.010.2017
CONFIGURATOR LEGEND
Standard equipment
Equipment unselected
Optional equipment selected
Not compatible equipment
Model:  S23DLDH005001-23m3
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.