MUCK SPREADERS BIG WHEEL CBW2

Manure spreaders / muck spreaders agricultural trailers Juscafresa.
Destined for large agriculture works / farms.
Capacity from 9,12m3 a 14,30m3.

Stands out for its excellent spread quality, its strongness, the high compact load capacity, stability on the grounds with different heights and reduction of the tractive force by decreasing the friction force against the ground.

Standard equipped with:
Drag system 2 chains 80/12 C 10 + S 275 JR, 4 chains 80/12 C 10 + S 275 JR or 80/12X 20 Mn 4 + S 355 JR
Veritcal beaters of 2 columns chopping type del tipo sinfín grupo B 540/330 rpm and height 2300 mm or group P 540/390 and height 2200 mm rpm with screwing flat spikes
Hydraulic back cover with vertical opening type guillotine with cylinder compensation system
Drawbar with springs of 13 leaves
Axles according to model:
ESH90 400x80: Square straight axle 90mm, 2100 track, 10 bolts, brakes 400x80
ESH100 400x80: Square straight axle 100mm, 2100 track, 10 bolts, brakes 400x80
ESH100 400x120: Square straight axle 100mm, 2100 track, 10 bolts, brakes 400x120
ESH110: Square straight axle 110mm, 2230 track, 10 bolts, brakes 400x120

STANDARD EQUIPMENT
 
BASIC FEATURES
Box length mm 4500
Upper box width mm 2060
Lower box width mm 1530
Side height mm 1570
Capacity m3 9,12
Power HP 90
 
DRIVE SHAFTS
Standard front transmission with security screw
Back transmission and overrunning clutch
 
DRAG SYSTEM
4 chains 80/12 manufactured with C 10 + S 275 JR
Hydraulic advance chains with reducer 1/24,3
Manual velocity commandment from the chains floor
 
BOX AND SPREADER GROUP
Upper frontal protective grille
Lateral ladder access
Synthetic sash to close the hydraulic back cover
Hydraulic back cover with vertical opening type guillotine with cylinders compensation system
Veritcal beaters of 2 columns chopping type group B 540/330 rpm with screwing flat spikes
 
CHASSIS AND BODYWORK
Circulation lights installation
Drawbar with springs of 13 leaves
Mechanic jack-stand
Hydraulic + mechanical break
Revolving ring towing eye 208284 Scharmüller ISO 20019
 
AXLE
ESH90 400x80: Square straight axle 90 mm, 2100 track, 10 bolts, brakes 400x80
 
 
OPTIONAL EQUIPMENT
 
DRIVE SHAFTS
Homokinetic joint front transmission and overrunning clutch
Homokinetic joint front transmission and security screw
Back transmission with friction disk clutch
 
DRAG SYSTEM
Hydraulic independents tensors 4 chaînes for hydraulic back cover with vertical opening type guillotine
Electronic velocity commandment from the chains floor
Independent hydraulic system: Independent hydraulic pump with functions by electro-valves group, Electronic control by cable used to opening, hydraulic back cover and the floor chains, with electronic velocity commandment from the chains floor, Electronic safety applications for operate the functions, DPA system for every wheel to control the advance of the chains, DPA GPS system to control the advance of the chains
DPA GPS system to control the advance of the chains. Note: Only fit with independent hydraulic system
GPS system
 
BOX AND SPREADER GROUP
Floor, laterals, hydrauilc back cover and frontal inox
Indicator door opening for hydraulic back cover with vertical opening type guillotine
Veritcal beaters of 2 columns chopping type group P 540/330 rpm with screwing flat spikes and height 2200mm. Note: includes change to first driveshaft with homokinetic joint and freewheel clutch and second driveshaft with friction disks clutch
Veritcal beaters of 2 columns chopping type group P 1000/566 rpm with screwing hand duck spikes and height 2200mm. Note 1: only for hen droppings. Note 2: includes change to first driveshaft with homokinetic joint and freewheel clutch and second driveshaft with friction disks clutch
Veritcal beaters of 2 columns chopping type group SP 1000/405 rpm with screwing hand duck spikes and height 2200mm. Note 1: only for hen droppings. Note 2: includes change to first driveshaft with homokinetic joint and freewheel clutch and second driveshaft with friction disks clutch
Veritcal beaters of 2 columns chopping type group SP 1000/405 rpm with screwing flat spikes and height 2200mm. Note: includes change to first driveshaft with homokinetic joint and freewheel clutch and second driveshaft with friction disks clutch
 
CHASSIS AND BODYWORK
Rotary beacon for the danger signalling
Side deflectors
Drawbar with springs of 13 leaves reduction
Hydraulic jack-stand with manual pump
Pneumatic break with block acts
Pneumatic break + hydraulic with block acts
Fixed ring towing eye 208092 Scharmüller ISO 20019
Ball towing eye 207909 Scharmüller ISO 24347
 
TYRES
Wheels (2) 18.4/15R34 (157A8) POWER DRIVE RADIAL R-1 356 ALLIANCE Diameter: 1671mm Section: 486mm Load at 25km/h: 4580kg/wheel Load at 40km/h: 4125kg/wheel
Wheels (2) 18.4/15R38 (167A8) POWER DRIVE RADIAL R-1 356 ALLIANCE Diameter: 1750mm Section: 480mm Load at 25km/h: 6050kg/wheel Load at 40km/h: 5450kg/wheel
Wheels (2) 23.1-26 16PR (159A8) HI-TRACTION DRIVE WHEEL 347 ALLIANCE Diameter: 1605mm Section: 587mm Load at 25km/h: 4856kg/wheel Load at 40km/h: 4375kg/wheel
Wheels (2) 620/75R26 (167A8) SUPER POWER DRIVE TIRE R-1W 360 ALLIANCE Diameter: 1590mm Section: 625mm Load at 25km/h: 6050kg/wheel Load at 40km/h: 5450kg/wheel
(A) Total length
6851
(C) Total width
2610
(E) Back cantilever
2192
(G) Height side
2813
(J) Hauteur totale
3186
(U) Side lenght
4153
() Wheel diameter
1650
(B) Outside length box + beater
5523
(D) Via the axes
2100
(F) Hight flat
945
(H) Hitch height
400
(K) Distance between notch and axle
4153
() Width inside box
1530

Catalog

Catalog PRODUCTS JUSCAFRESA - v.001.002.2018
Catalog SPREADERS general - v.002.005.2019
Catalog BIG WHEEL CBW2 - v.002.005.2019
CONFIGURATOR LEGEND
Standard equipment
Equipment unselected
Optional equipment selected
Not compatible equipment
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.