MUCK SPREADERS TRUCK MOUNTED TM2

Manure spreaders / muck spreaders agricultural trailers Juscafresa.
Destined for large corporations or agriculture works / farms.
Capacity depends on the truck.

Stands out for its excellent spread quality, its extreme strongness and high load capacity superior from the other series for agricultural corporations requiring to mount the bodywork on a truck chassis with an assembled spreader that provides the same quality that can be found in similar models made for tractor.

Standard equipped with:
Drag system 6 chains 80/18W 27 Mn Cr B5-2 + HARDOX 450
Double set of drag rungs by set of 6 chains for mud
Bodywork mounted on truck with spreader system of vertical beaters
Veritcal beaters of 2 columns chopping type group SP 1000/405 rpm with screwing flat spikes and height 2200 mm
Hydraulic back cover with vertical opening type guillotine with cylinder compensation system
Hydraulic back cover for beaters protection 2200 mm
Upper awning pneumatic or electric power up used by radio controler by cable with rails to protect the load

STANDARD EQUIPMENT
 
BASIC FEATURES
Capacity m3 16,85
 
DRIVE SHAFTS
PTO at the motor
 
DRAG SYSTEM
Hydraulic use for the chains
Hydraulic use for the beaters
6 chains 80/18W manufactured with 27 Mn Cr B5-2 + HARDOX 450
Hydraulic advance chains with double reducer 1/12,1 used from the cabin
Hydraulic advance chains with double reducer 1/12,1 used from the cabin
Electronic velocity commandment from the chains floor
Hydraulic advance of the chains with double reducer used from the cabin
Double set of drag rungs by set of 6 chains for mud
Double lower bottom chains
 
BOX AND SPREADER GROUP
Lateral ladder access
Synthetic sash to close the hydraulic back cover
Hydraulic back cover with vertical opening type guillotine with cylinders compensation system
Hydraulic back cover for beaters protection 2200mm
Veritcal beaters of 2 columns chopping type group SP 1000/405 rpm with screwing flat spikes and height 2200mm
Upper awning pneumatic or electric power up used by radio controler by cable with rails to protect the load. Note: only apt with hydraulic back cover with vertical opening type guillotine
Bodywork mounted on truck with spreader system of vertical beaters
 
CHASSIS AND BODYWORK
Circulation lights installation
 
 
OPTIONAL EQUIPMENT
 
BOX AND SPREADER GROUP
Floor, laterals, hydrauilc back cover and frontal inox
Spreader group of 2 plates for mud
Anti-embed side authorized
Anti-embed back authorized
 
CHASSIS AND BODYWORK
Tool box
Water tank
Semicircular polyethylene mud guard independent for every wheel
(A) Total length
9000
(B) Outside length box + beater
6410
(D) Via the axes
2120/1830
(F) Hight flat
1430
(K) Total height on the top of beaters
3030
(M) Inside width of the box
2270
() Inside length of the box
5000
() Beater
910
(L) Outside length box
5500
(C) Total width
2550
(E) Back cantilever
2300
(J) Height side
2900
(G) Hauteur totale
3400
() Inside height of the box without upswings
1470
() Inside volume of the box without upswings
16,85

Catalog

Catalog PRODUCTS JUSCAFRESA - v.001.002.2018
Catalog SPREADERS general - v.002.005.2019
Catalog TRUCK MOUNTED TM2 - v.001.006.2016
CONFIGURATOR LEGEND
Standard equipment
Equipment unselected
Optional equipment selected
Not compatible equipment
Model:  E55TM2-002
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.